|
| |
Filters
ProMark's filters all meet or exceed
industry standards. |
 |
 |
ProGuard Filter
The ProGuard Filter is a light duty, combination chemical
and particulate filter that replaces existing particulate-only
filters. It is has been used in a variety of commercial locations to
remove corrosive and odorous gases and to protect people
and computers. It is an ideal solution for commercial
buildings where dirty outside air enters intakes and where the
inside air contains pollutants from cleaning solutions, new
carpeting, etc. Typical applications also include schools,
indoor stadiums, casinos, restaurants, hotels and airports.
|
|
| 
|
PMA 90 Final Filters
The PMA 90 replaces standard 5 inch deep
final filters. It has twice the media content of
competitors filters and lasts twice as long. It
is a true 95% filter that provides higher performance,
lower pressure drops, and longer life at a competitive
price. Filter is bi-directional with guard screen
both up and down stream.
| Dimensions (Nominal): |
| PMA 90.4 |
24" h x 24" w x 5" d |
|
| PMA 90.2 |
12" h x 24" w x 5" d |
|
|
|
 |
Honeycomb Disposables
Honeycomb Disposables come in many sizes
and can be filled with a variety of media to address
specific gas phase needs. The honeycomb internal
structure ensures even distribution of media over
the whole panel in an economical, disposable format. |
|
 |
PMA Retro
PMA Retro filter modules are designed to
fit in existing air handling systems in order to
add gas phase capabilities. The Retro is designed
with 1" header to replace ridged or bag filters
providing gas contaminant control. The housing is
permanent and the 8 trays are either refillable
or honeycomb disposable. Any ProGuard media can
be used and trays come prefilled. |
|
| Toll
Free Phone:
800.809.8300 |
Phone:
847.676.1894 | Fax
847.676.1897
ProMark Associates, Inc. | 3344
W. Main St. | Skokie, IL 60076-2451 | USA
ProMark Associates, Inc. All rights reserved.
|
